
ServicesGutters
Gutters in Spout Springs
Overflowing, sagging or leaking gutters send water where it does damage: behind the fascia, against your siding and down along the foundation. We find out why yours are failing, show you photos of it, and fix or replace only what needs it.
What Good Gutters Do for Your Home
Your gutters have one job: catch the water coming off the roof and carry it far enough from the house that it can't soak the wood trim or pool by the slab. When they work, you barely notice them. When they don't, the damage shows up slowly as stained siding, soft fascia boards, washed-out mulch beds and damp crawl spaces.
Most gutter problems come down to a few causes. Sections pull loose because the hangers have backed out of the fascia. Joints on older sectional gutters start to drip. Downspouts get packed with pine needles and shingle grit. Or the system was simply sized too small for how much water your roof sheds in a hard summer thunderstorm.
We look at the whole path the water takes, from the roof edge down to where it lands in the yard. Sometimes the answer is a few new hangers and a resealed corner. Sometimes the gutters are past saving and a new one-piece run makes more sense. You'll see the photos either way and hear an honest answer about which one fits.
What Our Gutter Work Includes
Repairs and resealing
We rehang drooping sections on new hidden hangers, seal leaking joints and end caps, and adjust the slope so water heads for the downspout instead of pooling in the trough.
New one-piece gutters
Our aluminum gutters are formed in a single continuous length for each run, so there are no joints along the wall to give out. We size them to your roof area and pitch, which often means moving from older 5-inch gutters to 6-inch on larger or steeper roofs.
Downspouts and drainage
We clear clogged downspouts, add a second outlet on long runs that need one, and fit extensions or splash blocks so water lands well clear of your foundation.
Gutter guards
If needles and leaves keep packing your gutters, we'll go over the guard options with you and install the style that fits your roof and the trees nearby.
Fascia and drip edge check
We look at the board behind the gutter before anything new is hung. Soft wood or a missing drip edge goes in your photo report, since gutters screwed into rot won't hold for long.
Signs Your Gutters Need Attention
Rain pouring over the lip
Water spilling over the front edge in a heavy rain means the gutter is blocked, pitched away from the downspout or not big enough for the amount of roof draining into it.
Sagging or pulling away
A gutter that dips in the middle or tilts away from the house usually has hangers that have let go. The weight of trapped water and debris keeps pulling it looser over time.
Drips at seams and corners
Constant drips at the joints tell you the sealant has worn out. That water tends to hit the same patch of siding or trim again and again, which is where rot begins.
Stains, peeling or soft trim
Dark streaks below the gutter, flaking paint on the fascia or wood that gives when you press it all mean water has been slipping behind the gutter for some time.
Puddles or erosion near the house
Bare soil, scattered mulch or standing water by the foundation after a rain usually trace back to a downspout that is clogged, disconnected or draining too close to the wall.
Damage after a storm
Strong wind and falling branches can dent gutters or tear downspouts loose. If the roof took a hit too, our storm damage repair page explains how we handle both at once.
How a Gutter Job Goes
- 1
You call and we set a time
Let us know what you've noticed and we'll pick a visit time that suits you. There's no need for you to climb anything; the ladder work is ours.
- 2
Inspection and photo report
We check each run, joint, hanger and downspout, along with the fascia and roof edge above them. You receive a free photo report of what we found and what we suggest.
- 3
A clear written plan
We go over repair versus replacement, what each involves and what sets the price. When a storm caused the damage, we're glad to be there for the adjuster's visit and walk you through each step of the claim.
- 4
The work day
We cover plants and walkways, remove the old gutters when needed, and hang the repaired or new system with the correct slope. Most homes are finished in a single day.
- 5
Water test and cleanup
We run a hose through every run to make sure it drains, then haul off old material and collect stray screws, sealant bits and debris before leaving.
What Moves the Price of Gutter Work
Two things drive the price: how much work your gutters need and how much ladder setup your home takes. Once we've looked everything over, we write up the job line by line, so you can see what each part costs and nothing is folded into one vague number. If a bigger project is easier to pay for over time, financing is available through Acorn Finance.
- Repair or replacement
- New hangers and a few resealed joints make for a far smaller job than a full set of new gutters. We only recommend replacing them when a repair wouldn't hold up.
- Length and stories
- The total footage, how many corners and downspouts there are, and tall runs on a two-story home all add labor.
- Size and material
- Six-inch gutters and oversized downspouts handle heavy rain better, but they cost more than standard sizes. Gutter guards add to the total as well.
- Condition of the fascia
- If the boards behind the gutters are rotted, they get replaced first. Otherwise the new system has nothing solid to fasten to.
What Homeowners Ask Us About Gutters
Something not covered here? (910) 665-7217
How do you decide between fixing my gutters and replacing them?
A lot of gutters only need new hangers, fresh sealant at the joints or a slope correction. If the metal is bent, rusted through or dripping at one joint after another, new gutters are usually the better use of your money. The photos we take will show you which case you're in, and we'll tell you straight.
Why choose one-piece gutters over sectional ones?
Sectional gutters have a joint about every 10 feet, and each one can leak once the sealant gets old. One-piece gutters are formed on site to run the full length of each wall, so the only joints are at corners and downspouts. Fewer joints means fewer drips and less upkeep.
Do I need gutter guards?
It mostly comes down to the trees around your home. If pines or hardwoods fill your gutters and you're climbing up to clear them more than once or twice a year, guards can save you most of that work. With an open roof and few trees nearby, regular cleaning is often all you need.
Will storm damage to my gutters be covered by insurance?
Gutters bent by wind or falling limbs are often part of a storm claim, especially when the roof was damaged too. Whether it's covered is up to the adjuster. We photograph the damage, can meet the adjuster at your home, and help you through each step of the claim.
Should I have my roof checked at the same time?
We'd suggest it. Problems at the gutter line and problems at the roof edge often go hand in hand, and we're already up on the ladder. Our roof inspections page explains what that visit covers.

Find Out What's Going On With Your Gutters
We'll look at every run and downspout, check the trim behind them and send you photos of what we find. Then you decide what to do next, with no pressure.